Installation and use of high pressure fans
Nov 25, 2022
Precautions for installation and use of high pressure fans
What are the precautions for the installation and use of high pressure fans?
The high-pressure fan needs to pay attention to some matters in the process of installation and use, so that the high-pressure fan can operate normally. What specific precautions should be taken during the installation and use of the high-pressure fan? The introduction is as follows.
1. Precautions for the installation of high-pressure fans 1. Flat washers and spring washers must be used to tighten the screws.
2. It is essential to use rubber buffer glue to bear the weight of high-pressure fans, especially high-power high-pressure fans.
3. For some occasions that require noise, a muffler can be installed to reduce the noise (generally, about 5dB). The muffler is installed at the end of the air inlet duct or the air outlet duct.
4. For some occasions with high requirements on noise, according to the conditions of the machine itself, a layer of muffler foam can be added to meet the noise requirements on site.
5. When using muffler foam, pay attention to the distance between the high-pressure fan and the box, pay attention to the ventilation and heat dissipation of the high-pressure fan, and pay attention to the use of rubber buffer glue to bear the weight of the high-pressure fan.
6. The inlet and outlet pipes of the high-pressure fan should be connected with hoses to isolate vibration.
www.jnblower.com
