Wuxi JN Fan Co.,Ltd
Product Categories
Home > Exhibition > Content

Maintenance and Operation of Boiler centrifugal Fan

Wuxi JN Fan Co.,Ltd | Updated: Nov 17, 2018

1. In the process of operation of boiler centrifugal fan, we should always pay attention to the operation of induced fan, such as whether every department is in good condition (oil level, cooling water, electric instrument, oil standard, pipeline, etc.).

2. The control door of centrifugal fan is flexible, so that it can be adjusted at any time according to the change of boiler load, so that it can run well.

3. The bearing temperature should not be higher than 40 ℃ and the surface temperature should not be higher than 80 ℃ during the operation of the induced fan, and the veracity of the thermometer and oil standard should be checked regularly.

4. In the process of opening, stopping and running, the abnormal phenomenon should be checked immediately, the trouble should be removed in time, but the repair of the fan should not be carried out in operation.

5. Remove dust from the fan regularly. Dirt and stagnant water and other impurities to prevent corrosion, in addition to each repair after the replacement of lubricating oil once a normal 4-6 months to replace the oil level to maintain the middle line, do not oil too much, to prevent bearing heating oil leakage.

6. When the induced fan occurs the following phenomena, emergency stop, and find out the cause, timely removal to ensure safe operation.http://www.jnblower.com/

Products Categories
Contact Us
Wuxi JN Fan Co.,Ltd
Address: 68#, Xinya Road, Luoshe Town, Huishan District, Wuxi City, Jiangsu, China
Tel: +86-510-83830221  Fax: +86-510-83831687
E-mail: info@jiangnanfan.com
Copyright © Wuxi JN Fan Co.,Ltd